Fluke Testers

OSS - High Density Mobile Shelving (HDMS) System

***AMENDMENT 3: The solicitation is amended to make changes to the attached solicitation (26Q0020 A00003 High Density Mobile Shelving). All changes are highlighted. All other terms and conditions remain unchanged. -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ***AMENDMENT 2: The solictation is amended to address a question from an interested party: Question 1: Joint Base Elmendorf-Richardson (JBER) exists in a high seismic zone. What are the seismic considerations and anti-tip requirements for this solicitation on the High-Density Mobile Shelving (HDMS)? Answer 1: Compliance with Safety Regulations: The contractor is solely responsible for ensuring that all proposed equipment, designs, and installations strictly comply with all applicable local, state, national, and military safety codes, building regulations, and industry standards (including, but not limited to, OSHA and manufacturer safety specifications). Seismic Calculations & Permitting: Specialized seismic-rated structural calculations, localized structural Professional Engineer (PE) stamps, and building permits are not required to be submitted to the government as a deliverable under this solicitation. Anti-Tip & Floor Anchoring: To satisfy the safety requirements of the installation, the contractor must provide standard floor-anchoring and manufacturer-approved anti-tip mechanisms to ensure the high-density mobile shelving system is stable, securely anchored, and fully safe for daily military operations. All other terms and conditions remain unchanged. ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ***AMENDMENT 1: The solictation is amended to add details for a site visit. Site visit will be conducted on Thursday, 24 Sept @ 1430 Alaska time. Address for the site visit: 17470 Airlifter Drive (Hangar 18), JBER, AK 99506. Please coordinate prior with the government (phone or email) of intent to attend site visit, and if base access is required. ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- See attachments for combo/solicitation.

Vertical Tank Storage System Demolition and Removal

This is a combined synopsis/solicitation for commercial products and commercial services prepared in accordance with the format in Revolutionary Federal Acquisition Regulation Overhaul (RFO) Part 12, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. Solicitation Number: This solicitation is issued as a Request for Quote (RFQ) under solicitation number FA500026Q0075. Applicable Regulations: The solicitation document and incorporated provisions and clauses by reference and are those in effect through the RFO Part 12, Acquisition of Commercial Products and Commercial Services, published on the RFO page at https://www.acquisition.gov/far-overhaul/far-part-deviation-guide/ in lieu of the text codified at 48 CFR chapter 1 (https://www.ecfr.gov). The Defense Federal Acquisition Regulation Supplement (DFARS) will follow class deviations of each part as outlined at https://www.acq.osd.mil/dpap/dars/dfars_far_overhaul_class_deviations.html, in lieu of the text codified at 48 CFR chapter 2. Description of Requirements: The Government is issuing a Request for Quote for demolition and removal services on a Vertical Tank Storage System. See attachment 1 – Performance Work Statement for complete performance requirements. Place of Performance: Location: Joint Base Elmendorf-Richardson, AK Provision RFO 52.212-2, Evaluation – Commercial Products and Commercial Services: Applies to this acquisition. The Government will award a contract resulting from this solicitation to the responsible offeror whose quote conforms to the solicitation and will be most advantageous to the Government, price and other factors considered. This is a total small business set aside acquisition; and the award will be based on: Technical Acceptability: The Government will evaluate the contractor's proposed quote to ensure it clearly and adequately meets Performance Work Statement. Price Reasonableness: Evaluated in accordance with RFO Part 12. Quote Submission: Quotes are due no later than 11:00 AM AKST on 28 September 2026. Quotes, shall be submitted electronically via email to the Contracting Officer and Contracting Specialist: Name: TSgt William Johnson Contracting Officer, 673 CONS/PKB Email: william.johnson.119@us.af.mil Name: A1C Rex Edades, Contract Specialist, 673 CONS/PKB Email: rex.edades@us.af.mil

Vertical Tank Storage System Demolition and Removal

*Ammendment 1 Start* The purpose of this ammend is to incorporate the Performance Work Statement without the "Draft" watermark into the solicitation. All other aspects of the solicitation remain the same. *Ammendment 1 End* This is a combined synopsis/solicitation for commercial products and commercial services prepared in accordance with the format in Revolutionary Federal Acquisition Regulation Overhaul (RFO) Part 12, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued. Solicitation Number: This solicitation is issued as a Request for Quote (RFQ) under solicitation number FA500026Q0075. Applicable Regulations: The solicitation document and incorporated provisions and clauses by reference and are those in effect through the RFO Part 12, Acquisition of Commercial Products and Commercial Services, published on the RFO page at https://www.acquisition.gov/far-overhaul/far-part-deviation-guide/ in lieu of the text codified at 48 CFR chapter 1 (https://www.ecfr.gov). The Defense Federal Acquisition Regulation Supplement (DFARS) will follow class deviations of each part as outlined at https://www.acq.osd.mil/dpap/dars/dfars_far_overhaul_class_deviations.html, in lieu of the text codified at 48 CFR chapter 2. Description of Requirements: The Government is issuing a Request for Quote for demolition and removal services on a Vertical Tank Storage System. See attachment 1 – Performance Work Statement for complete performance requirements. Place of Performance: Location: Joint Base Elmendorf-Richardson, AK Provision RFO 52.212-2, Evaluation – Commercial Products and Commercial Services: Applies to this acquisition. The Government will award a contract resulting from this solicitation to the responsible offeror whose quote conforms to the solicitation and will be most advantageous to the Government, price and other factors considered. This is a total small business set aside acquisition; and the award will be based on: Technical Acceptability: The Government will evaluate the contractor's proposed quote to ensure it clearly and adequately meets Performance Work Statement. Price Reasonableness: Evaluated in accordance with RFO Part 12. Quote Submission: Quotes are due no later than 11:00 AM AKST on 28 September 2026. Quotes, shall be submitted electronically via email to the Contracting Officer and Contracting Specialist: Name: TSgt William Johnson Contracting Officer, 673 CONS/PKB Email: william.johnson.119@us.af.mil Name: A1C Rex Edades, Contract Specialist, 673 CONS/PKB Email: rex.edades@us.af.mil

Brand Name Bobcat ToolCat UW56 Utility Work Machine

COMBO Joint Base Elmendorf Richardson, Alaska – Bobcat Toolcats Notice to Offeror(s)/Supplier(s): Funds are not presently available for this effort. No award will be made under this solicitation until funds are available. The Government reserves the right to cancel this solicitation, either before or after the closing date. In the event the Government cancels this solicitation, the Government has no obligation to reimburse an offeror for any costs. (i) This is a combined synopsis/solicitation for commercial products or commercial services prepared in accordance with Part 12. (RFO 12.202(b)(1)). This announcement constitutes the only solicitation. Quotes are being requested and a separate written solicitation will not be issued. (ii) Solicitation number FA500026Q0072 is issued as a Request for Quotation (RFQ) for the procurement of brand name Bobcat Toolcats in accordance with (IAW) Attachment 1_Salient Characteristics – ToolCat. (iii) This acquisition is a total set-aside for small business concerns. North American Industry Classification System (NAICS) code: 333120 – Construction Machinery Manufacturing Product Service Code (PSC): – 3805 – Earth Moving and Excavating Equipment Size Standard: 1,250 Employees (iv) All items shall be delivered to FOB destination as follows: Joint Base Elmendorf-Richardson (JBER), Alaska: no later than 31 January 2027. (v) This solicitation incorporates provisions and clauses by reference. The full text these may be accessed electronically at https://www.acquisition.gov/far-overhaul/far-part-deviation-guide and https://www.acq.osd.mil/dpap/dars/dfars_far_overhaul_class_deviations.html. (vi) A list of additional provisions and contract clauses that apply to this solicitation can be found in Attachment 2_ Additional Provisions & Clauses - ToolCat. (vii) Any amendments to this solicitation and any resultant contract must be completed in writing by the Contracting Officer. Changes made that are not authorized by the Contracting Officer are made at the risk of the contractor, to include costs. The Contracting Officer is the only Government representative authorized to change the terms and conditions of this requirement. (viii) Contract Line Item Numbers (CLINs) The contractor shall provide pricing for the following firm-fixed-price (FFP) CLIN: CLIN Description Qty Unit Unit Price Extended Price 0001 1 Brand Name Bobcat ToolCat Work Machine 1 EA $ $ with Engine Block Heater, Traction Control, Power Bob-Tach, Lugged Tires, Deluxe Road Package, In-Cab Attachment Control Device/ Joystick, 84" Snow Blade, & 32" x 74" Snow Blower. NOTES: 1) See Attachment 1 for Salient Characteristics 2) Provide all warranty information 3) Delivery fees included in quote. Deliver/Ship to: F1W2A4 Jason R. Carillo 18729 TALLEY AVE JBER, AK 99506 TOTAL Total Firm-Fixed-Price: $ (ix) Description of Requirements The Government is issuing a Request for Quote for one (1) Brand Name Bobcat Toolcat Utility Work Machines UW56, with features and attachments. See attachment 1 – Salient Characteristics – ToolCat_Redacted for complete specifications required. (x) Provision 52.212-1 Instructions to Offerors—Commercial Products and Commercial Services (RFO) is hereby incorporated by reference, with the same force and effect as if it were given in full text. In addition to the following addendum, all terms and conditions of RFO 52.212-1 remain in effect. The following have been tailored to this procurement and are hereby added via addendum: a. To ensure timely and equitable evaluation of the quote, the Vendor must follow the instructions contained herein. The quote must be complete, self-sufficient, and respond directly to the requirements of this solicitation. Vendors are required to meet all solicitation requirements, including terms and conditions, representations and certifications, and technical requirements. Vendors must clearly identify any exception to the solicitation terms and conditions and provide complete accompanying rationale. b. Specific Instructions: The response shall consist of the following: Part 1 – Technical Acceptability – Quote must provide clear and compelling evidence of its ability to meet all salient characteristics detailed in Attachment 1. Part 2 – Price – Submit a quote using Attachment 3 – Pricing Schedule Toolcats. Important Notes: In compliance with RFO Subpart 4.309, Storage, handling, and contract files, the Government will retain an electronic copy of your quote. (End of Provision) (xi) If a Vendor believes the requirements in these instructions contain an error, omission, or are otherwise unsound, the Vendor shall immediately notify the Contracting Officer and Contract Specialist in writing with supporting rationale, prior to quote submission. (xii) All companies must be registered in the System for Award Management at https://www.sam.gov/portal/public/SAM/ to be considered for award. The Government will not provide contract financing for this acquisition. Invoice instructions are located in R-DFARS clause 252.232-7006 Wide Area WorkFlow Payment Instructions. (xiii) Provision 52.212-2 Evaluation—Commercial Products and Commercial Services (RFO) this provision has been tailored to this procurement and is provided in full-text below: Evaluation factors. The Government will award a contract resulting from this RFQ to the responsible Vendor whose quote, conforming to the RFQ, will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate quotes: i. Technical Acceptability: The Government will evaluate the quote on a Pass or Fail basis and assign an Acceptable or Unacceptable rating as described in Table 1 below: Table 1. Ratings Acceptable: The Vendor demonstrates that the quoted supply can meet Attachment 1. Unacceptable: The Vendor does not demonstrate that the quoted supply can meet Attachment 1. ii. Price: Award will be made that is best value to the government; and iii. Responsibility. IAW R-DFARS 204.7603(b) and clause 252.204-7024, Notice on the Use of the Supplier Performance Risk System (SPRS), a Vendor’s risk will be considered. Vendors are required to comply with National Institute of Standards and Technology (NIST) Special Publication (SP) 800-171 by conducting a self-assessment in SPRS (https://www.sprs.csd.disa.mil/nistsp.htm). Note, these assessments are to be completed every three (3) years. (End of Provision) (xiv) Clause RFO 52.212-4—Contract Terms and Conditions – Commercial Products and Commercial Services applies to this acquisition. (End of Clause) (xv) Quote Submission All questions and/or requests for information must be submitted in writing and sent by e-mail correspondence no later than 12:00PM AKDT on 25 September 2026. This RFQ closes at 2:00PM AKDT on 28 September 2026. All quotes for this solicitation shall be good for sixty (60) days and submitted via email to: Jarod L. Lemke, Contract Specialist, 673 CONS/PKB Email: jarod.lemke.1@us.af.mil Joseph C. Ford, Contracting Officer, 673 CONS/PKB: Email: joseph.ford.21@us.af.mil. (xvi) Special Notice: File Submission Requirements: Do not submit files in .zip format. The Air Force Network security protocols prevent the delivery of .zip files, and they will not be received. Use acceptable file formats such as .pdf, .docx, or .xlsx. (xvii) Clause RFO 52.216-32, Task-Order and Delivery-Order Ombudsman (a) An ombudsman has been appointed to hear and facilitate the resolution of concerns from offerors, potential offerors, and others for this acquisition. When requested, the ombudsman will maintain strict confidentiality as to the source of the concern. The existence of the ombudsman does not affect the authority of the program manager, contracting officer, or source selection official. Further, the ombudsman does not participate in the evaluation of proposals, the source selection process, or the adjudication of protests or formal contract disputes. The ombudsman may refer the interested party to another official who can resolve the concern. (b) Before consulting with an ombudsman, interested parties must first address their concerns, issues, disagreements, and/or recommendations to the contracting officer for resolution. Consulting an ombudsman does not alter or postpone the timelines for any other processes (e.g., agency level bid protests, GAO bid protests, requests for debriefings, employee-employer actions, contests of OMB Circular A-76 competition performance decisions). (c) If resolution cannot be made by the contracting officer, the interested party may contact the ombudsman, AFICC/KH (Chief Enlisted manager), 25 E Street, Suite B-100, JBPH-H, HI 96853-5427, Phone : (808) 789-6128, FAX: (808) 449-8571, e-mail: afica.kh@us.af.mil. Concerns, issues, disagreements, and recommendations that cannot be resolved at the Center/MAJCOM/FLDCOM/DRU ombudsman level, may be brought by the interested party for further consideration to the Department of the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number (571) 256-2395, facsimile number (571) 256-2431. (d) The ombudsman has no authority to render a decision that binds the agency. (e) Do not contact the ombudsman to request copies of the solicitation, verify offer due date, or clarify technical requirements. Such inquiries shall be directed to the contracting officer. (End of clause) (xv) The Vendor acknowledges that should the quote terms and conditions and/or agreement conflict with mandatory provisions of the Revolutionary FAR Overhaul (RFO) and other Federal law applicable to commercial acquisitions, to the extent of such conflict the RFO and Federal law govern and conflicting Vendor terms and conditions and/or agreement are unenforceable and are not considered incorporated into any resultant contract. (xviii) No Defense Priorities and Allocations System (DPAS) assigned rating applies to this acquisition. (xvix) No additional contract requirements apply to this acquisition. List of Attachments: Attachment 1_Salient Characteristics – ToolCat_Redacted Attachment 2_Additional Provisions and Clauses - ToolCat Attachment 3_Pricing Schedule – ToolCat Attachment 4_Brand Name Justification - ToolCat_Redacted

Brand Name Bobcat ToolCat UW56 Utility Work Machine

Amendment 0001 - Attachment "Amendment 0001_Q and A Response_FA500026Q0072 - ToolCat" Added and removed "Brand Name or Equal" from solicitation to "Brand Name" only. COMBO Joint Base Elmendorf Richardson, Alaska – Bobcat Toolcats Notice to Offeror(s)/Supplier(s): Funds are not presently available for this effort. No award will be made under this solicitation until funds are available. The Government reserves the right to cancel this solicitation, either before or after the closing date. In the event the Government cancels this solicitation, the Government has no obligation to reimburse an offeror for any costs. (i) This is a combined synopsis/solicitation for commercial products or commercial services prepared in accordance with Part 12. (RFO 12.202(b)(1)). This announcement constitutes the only solicitation. Quotes are being requested and a separate written solicitation will not be issued. (ii) Solicitation number FA500026Q0072 is issued as a Request for Quotation (RFQ) for the procurement of brand name Bobcat Toolcats in accordance with (IAW) Attachment 1_Salient Characteristics – ToolCat. (iii) This acquisition is a total set-aside for small business concerns. North American Industry Classification System (NAICS) code: 333120 – Construction Machinery Manufacturing Product Service Code (PSC): – 3805 – Earth Moving and Excavating Equipment Size Standard: 1,250 Employees (iv) All items shall be delivered to FOB destination as follows: Joint Base Elmendorf-Richardson (JBER), Alaska: no later than 31 January 2027. (v) This solicitation incorporates provisions and clauses by reference. The full text these may be accessed electronically at https://www.acquisition.gov/far-overhaul/far-part-deviation-guide and https://www.acq.osd.mil/dpap/dars/dfars_far_overhaul_class_deviations.html. (vi) A list of additional provisions and contract clauses that apply to this solicitation can be found in Attachment 2_ Additional Provisions & Clauses - ToolCat. (vii) Any amendments to this solicitation and any resultant contract must be completed in writing by the Contracting Officer. Changes made that are not authorized by the Contracting Officer are made at the risk of the contractor, to include costs. The Contracting Officer is the only Government representative authorized to change the terms and conditions of this requirement. (viii) Contract Line Item Numbers (CLINs) The contractor shall provide pricing for the following firm-fixed-price (FFP) CLIN: CLIN Description Qty Unit Unit Price Extended Price 0001 1 Brand Name Bobcat ToolCat Work Machine 1 EA $ $ with Engine Block Heater, Traction Control, Power Bob-Tach, Lugged Tires, Deluxe Road Package, In-Cab Attachment Control Device/ Joystick, 84" Snow Blade, & 32" x 74" Snow Blower. NOTES: 1) See Attachment 1 for Salient Characteristics 2) Provide all warranty information 3) Delivery fees included in quote. Deliver/Ship to: F1W2A4 Jason R. Carillo 18729 TALLEY AVE JBER, AK 99506 TOTAL Total Firm-Fixed-Price: $ (ix) Description of Requirements The Government is issuing a Request for Quote for one (1) Brand Name Bobcat Toolcat Utility Work Machines UW56, with features and attachments. See attachment 1 – Salient Characteristics – ToolCat_Redacted for complete specifications required. (x) Provision 52.212-1 Instructions to Offerors—Commercial Products and Commercial Services (RFO) is hereby incorporated by reference, with the same force and effect as if it were given in full text. In addition to the following addendum, all terms and conditions of RFO 52.212-1 remain in effect. The following have been tailored to this procurement and are hereby added via addendum: a. To ensure timely and equitable evaluation of the quote, the Vendor must follow the instructions contained herein. The quote must be complete, self-sufficient, and respond directly to the requirements of this solicitation. Vendors are required to meet all solicitation requirements, including terms and conditions, representations and certifications, and technical requirements. Vendors must clearly identify any exception to the solicitation terms and conditions and provide complete accompanying rationale. b. Specific Instructions: The response shall consist of the following: Part 1 – Technical Acceptability – Quote must provide clear and compelling evidence of its ability to meet all salient characteristics detailed in Attachment 1. Part 2 – Price – Submit a quote using Attachment 3 – Pricing Schedule Toolcats. Important Notes: In compliance with RFO Subpart 4.309, Storage, handling, and contract files, the Government will retain an electronic copy of your quote. (End of Provision) (xi) If a Vendor believes the requirements in these instructions contain an error, omission, or are otherwise unsound, the Vendor shall immediately notify the Contracting Officer and Contract Specialist in writing with supporting rationale, prior to quote submission. (xii) All companies must be registered in the System for Award Management at https://www.sam.gov/portal/public/SAM/ to be considered for award. The Government will not provide contract financing for this acquisition. Invoice instructions are located in R-DFARS clause 252.232-7006 Wide Area WorkFlow Payment Instructions. (xiii) Provision 52.212-2 Evaluation—Commercial Products and Commercial Services (RFO) this provision has been tailored to this procurement and is provided in full-text below: Evaluation factors. The Government will award a contract resulting from this RFQ to the responsible Vendor whose quote, conforming to the RFQ, will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate quotes: i. Technical Acceptability: The Government will evaluate the quote on a Pass or Fail basis and assign an Acceptable or Unacceptable rating as described in Table 1 below: Table 1. Ratings Acceptable: The Vendor demonstrates that the quoted supply can meet Attachment 1. Unacceptable: The Vendor does not demonstrate that the quoted supply can meet Attachment 1. ii. Price: Award will be made that is best value to the government; and iii. Responsibility. IAW R-DFARS 204.7603(b) and clause 252.204-7024, Notice on the Use of the Supplier Performance Risk System (SPRS), a Vendor’s risk will be considered. Vendors are required to comply with National Institute of Standards and Technology (NIST) Special Publication (SP) 800-171 by conducting a self-assessment in SPRS (https://www.sprs.csd.disa.mil/nistsp.htm). Note, these assessments are to be completed every three (3) years. (End of Provision) (xiv) Clause RFO 52.212-4—Contract Terms and Conditions – Commercial Products and Commercial Services applies to this acquisition. (End of Clause) (xv) Quote Submission All questions and/or requests for information must be submitted in writing and sent by e-mail correspondence no later than 12:00PM AKDT on 25 September 2026. This RFQ closes at 2:00PM AKDT on 28 September 2026. All quotes for this solicitation shall be good for sixty (60) days and submitted via email to: Jarod L. Lemke, Contract Specialist, 673 CONS/PKB Email: jarod.lemke.1@us.af.mil Joseph C. Ford, Contracting Officer, 673 CONS/PKB: Email: joseph.ford.21@us.af.mil. (xvi) Special Notice: File Submission Requirements: Do not submit files in .zip format. The Air Force Network security protocols prevent the delivery of .zip files, and they will not be received. Use acceptable file formats such as .pdf, .docx, or .xlsx. (xvii) Clause RFO 52.216-32, Task-Order and Delivery-Order Ombudsman (a) An ombudsman has been appointed to hear and facilitate the resolution of concerns from offerors, potential offerors, and others for this acquisition. When requested, the ombudsman will maintain strict confidentiality as to the source of the concern. The existence of the ombudsman does not affect the authority of the program manager, contracting officer, or source selection official. Further, the ombudsman does not participate in the evaluation of proposals, the source selection process, or the adjudication of protests or formal contract disputes. The ombudsman may refer the interested party to another official who can resolve the concern. (b) Before consulting with an ombudsman, interested parties must first address their concerns, issues, disagreements, and/or recommendations to the contracting officer for resolution. Consulting an ombudsman does not alter or postpone the timelines for any other processes (e.g., agency level bid protests, GAO bid protests, requests for debriefings, employee-employer actions, contests of OMB Circular A-76 competition performance decisions). (c) If resolution cannot be made by the contracting officer, the interested party may contact the ombudsman, AFICC/KH (Chief Enlisted manager), 25 E Street, Suite B-100, JBPH-H, HI 96853-5427, Phone : (808) 789-6128, FAX: (808) 449-8571, e-mail: afica.kh@us.af.mil. Concerns, issues, disagreements, and recommendations that cannot be resolved at the Center/MAJCOM/FLDCOM/DRU ombudsman level, may be brought by the interested party for further consideration to the Department of the Air Force ombudsman, Associate Deputy Assistant Secretary (ADAS) (Contracting), SAF/AQC, 1060 Air Force Pentagon, Washington DC 20330-1060, phone number (571) 256-2395, facsimile number (571) 256-2431. (d) The ombudsman has no authority to render a decision that binds the agency. (e) Do not contact the ombudsman to request copies of the solicitation, verify offer due date, or clarify technical requirements. Such inquiries shall be directed to the contracting officer. (End of clause) (xv) The Vendor acknowledges that should the quote terms and conditions and/or agreement conflict with mandatory provisions of the Revolutionary FAR Overhaul (RFO) and other Federal law applicable to commercial acquisitions, to the extent of such conflict the RFO and Federal law govern and conflicting Vendor terms and conditions and/or agreement are unenforceable and are not considered incorporated into any resultant contract. (xviii) No Defense Priorities and Allocations System (DPAS) assigned rating applies to this acquisition. (xvix) No additional contract requirements apply to this acquisition. List of Attachments: Amendment 0001_Q and A Response_FA500026Q0072 - ToolCat Attachment 1_Salient Characteristics – ToolCat_Redacted Attachment 2_Additional Provisions and Clauses - ToolCat Attachment 3_Pricing Schedule – ToolCat Attachment 4_Brand Name Justification - ToolCat_Redacted

Pope Army AirfieldFlooring

FA445226R0018_43d AMOG Carpet Repair_Request for Proposal

Amendment 03 was added to update "Amendment02Attachment 4_Price Proposal" and to add the Questions and Answers to the Site Visit. Amendment 02 was added to provide an update to SOW and an updated appendix A. This is a formal Request for Proposal (RFP) for commercial construction services prepared in accordance with Revolutionary FAR Overhaul (RFO) 12.201, in conjunction with RFO Part 36 procedures. This effort is being competitively solicited as a 100% small business set-aside under NAICS code 238330, Flooring Contractors with a small business size standard of $19.0 Million. This RFP is for the subject project to be awarded in accordance with RFO Part 12 and Part 36 procedures and the specific instructions outlined within this RFP and its attachments. The Government intends to award a single firm-fixed-price purchase order for the subject requirement.