Skip to content
SAM.govCloses in 30 days

Residential Electrical Distribution and backup power system upgrade for U.S. Embassy Quito at Government Owned Residential compound Ziba

Electrical
Location
Quito, United States
Responses due
Sep 4, 2026

Overview

Dear Prospective Quoter: Subject: Request for Proposals number 19EC7526R0005 Enclosed is a Request for Proposals (RFP) for Residential Electrical Distribution and backup power system upgrade for U.S. Embassy Quito at Government Owned Residential compound Ziba. If you would like to submit a proposal, follow the instructions in Section L of the solicitation, complete the required portions of the attached document, and submit it to the address shown on Standard Form 1442 that follows this letter. The U.S. Government intends to award a contract/purchase order to the responsible company submitting an acceptable offer at the lowest price. We intend to award a contract/purchase order based on initial Proposals, without holding discussions, although we may hold discussions with companies in the competitive range if there is a need to do so. The Embassy intends to conduct a pre-proposal conference at the site, The pre-proposal conference will be held on August 3, 2026, at 11:00 am Quito Time at Ziba residences compound located located in Cumbayá, at the intersection of Humberto Fierro and Cesar Borja streets. Prospective offerors should contact quitoprocurement@state.gov for additional information or to arrange entry to the residences. Direct any questions regarding this solicitation in writing to Mr. Matthew Madden, Contracting Officer to quitoprocurement@state.gov before August 11, 2026, at 16:00 hours Quito time. Proposals are due by September 4, 2026 before 16:00 hours Quito time. No Proposals will be accepted after this time. Proposals must be in English and incomplete proposals will not be accepted. Your proposal must be submitted electronically to quitocontracts@state.gov, It is important to make sure the submission is made in specific size and format; in MS-Word 2007/2010 or MS-Excel 2007/2010 or Adobe Acrobat (pdf) file format. The file size must not exceed 30MB. If the file size should exceed 30MB, the submission must be made in separate files and attached to separate emails with less than 30MB each. The technical and economic proposals must be submitted separately. Do not include pricing within the technical proposal. Failure to that may deem the offeror’s proposal to be considered non-responsive. In order for a proposal to be considered, you must also complete and submit the following: 1. SF-1442 2. Section B, Pricing 3. Section K Representations and Certifications 4. Additional information as required in Section L 6. Proof of SAM Registration Offerors shall be registered in the SAM (System for Award Management) database at https://www.sam.gov prior to submittal of their offer/proposal as prescribed under FAR 4.1102. Failure to be registered at time of bid submission shall deem the offeror’s quote to be considered non-responsible to the solicitation instructions and requirement and no further consideration will be given. Therefore, offerors are highly encouraged to register immediately if they are interested in submitting a response to this requirement.

Source: SAM.govView in Constructeams

Similar open bids

NYC City RecordCloses today

SMD_A&CM_RFQ #517992 - Elevator Rehabilitation and Maintenance and Service at Gun Hill Houses

Scope of work The work under this Contract consists of the rehabilitation, modernization, maintenance, and service of thirteen (13) elevators located in six (6) residential buildings at Gun Hill Houses. The Contractor shall furnish all labor, materials, equipment, supervision, tools, transportation, and incidental services necessary to complete the Work in accordance with the Contract Documents. The Work includes, but is not limited to, the removal and replacement of existing elevator systems and the furnishing and installation of new elevator equipment, including elevator machines, controllers, hoistway components, car enclosures, entrance and car doors, communication systems, safety devices, and associated electrical and electronic components. The Work also includes all required testing, inspections, commissioning, training, and coordination with NYCHA and other contractors, including a separate electrical contractor. The Work shall be performed in phased construction to maintain building operations and minimize disruptions to residents. The Contractor shall coordinate all activities to comply with the scheduling, outage duration, and performance requirements set forth in the Contract Documents. In addition to the construction and modernization services described in Part A, the Contractor shall enter into a separate maintenance and service agreement (Part B) to provide preventive maintenance, repairs, inspections, emergency response, and related elevator support services following the completion and acceptance of the modernization work. RFQ Solicitation Timetable A non-mandatory virtual pre-bid conference will be held on07/09/2026 at 11:00 am, via Microsoft Teams. Pre bid TeamsMeeting information: (646) 838-1534 Conference ID: (227 605772 821 377) Passcode: ok3ap3DK. Although attendance is notmandatory; it is strongly recommended that all interestedvendors attend. https://teams.microsoft.com/l/meetup-join/19%3ameeting_ODBlZmQzOTktNmI4MS00YmM1LWI5YzQtY2IyYjhjODEwNzE0%40thread.v2/0?context=%7b%22Tid%22%3a%22709ab558-a73c-4f8f-98ad-20bb096cd0f8%22%2c%22Oid%22%3a%22d3d463fd-7800-405e-81cf-ed221f645c8a%22%7d All questions related to this RFQ are to be submitted viaemail to the A&CM Procurement Unit atacm.procurement@nycha.nyc.gov with the RFQ number as theSubject line by no later than 07/16/2026 on 2:00PM Bidderswill be permitted to ask additional questions at the Pre-bidConference. Responses to all submitted questions will beavailable for public viewing in Sourcing under the RFQ. Bid Submission Requirements Vendors shall electronically upload a single .pdf containing ALL components of the bid into iSupplier by the RFQ Bid Submission Deadline. NYCHA will NOT accept hardcopy Bids or bids via e-mail, fax, or mail. Instructions for registering for iSupplier can be found at http://www1.nyc.gov/site/nycha/business/isupplier-vendor-registration.page Pre-Bid Conference - July 09, 2026 - 11:00 AM Site Visit - July 13, 2026 - 9:00 AM   RFQ Question Deadline - July 16 2026  - 02:00 PM Question and Answer Release Date - July 23, 2026 After Bidder registers for iSupplier, it typically takes 24 to 72 hours for Bidders iSupplier profile to be approved. It is Vendors sole responsibility to complete iSupplier registration and submit its Bid before the RFQ Bid Submission Deadline. NYCHA is not responsible for delays caused by technical difficulty or caused by any other occurrence. For assistance regarding iSupplier please email procurement@nycha.nyc.gov

New York
Due Aug 5, 2026View bid
TxDOTCloses today

SH 34 IH 20 EB to N of SH 243

Base Repair, Mill and Overlay, Signing and Pavement Markings

Terrell, Texas$7,199,790 (est.)
Due Aug 5, 2026View bid
TxDOTCloses today

FY25 Fort Worth District-wide ADA Projec

ADA Remediation and New Construction

Texas$2,655,169 (est.)
Due Aug 5, 2026View bid
TxDOTCloses today

CS; @ US 81/287 TO FM 3479/HARMON/N TAR

CONSTRUCT NORTH TARRANT PARKWAY OVER US 81/287 WITH TURNAROUND ON EASTSIDE; CONSTRUCT HARMON RD OVER US 81/287

Fort Worth, Texas$22,931,806 (est.)
Due Aug 5, 2026View bid
TxDOTCloses today

US 81; N of Harmon Rd to N of IH 35W

RECONSTRUCT 2 TO 2 LANE NORTHBOUND FRONTAGE ROAD

Fort Worth, Texas$8,290,895 (est.)
Due Aug 5, 2026View bid
TxDOTCloses today

SH 11 from US 259 to Cass C/L

Rehabilitate existing 4-lane highway

Daingerfield, Texas$11,759,396 (est.)
Due Aug 5, 2026View bid